ETAP 12.5 adds a broad and robust set of new enhancements to the ETAP suite, as well as powerful new
analysis modules and time-saving capabilities. These include:
•
Dynamic Parameter Estimation & Tuning - DPET
•
GOST Short Circuit - R 52735 Standard
•
Distributed electrical SCADA technology
•
Thin-client consoles
•
Web real-time consoles
•
Native SCADA Communication Protocols
•
IEC 61850 substation automation
•
Phasor measurement unit archive and visualization
•
Waveform capture and visualization
This New Features Guide describes important new capabilities in ETAP 12.5. These new features and
functions demonstrate our shared commitment to customers and business partners to provide the
most comprehensive solutions for the design and operation of critical power systems now, as well
as the energy technologies for tomorrow.
For nearly three decades, ETAP has been the leading modeling platform used to design, analyze,
and optimize electrical power systems in the most demanding industry applications. Similarly,
ETAP Real-Time
™
– which has been providing online diagnostics, predictive simulation, optimization,
and management of power systems for more than 20 years – has been deployed in a multitude of
customer installations to ensure their reliable and energy-efficient operation.

AltoQi Eberick V8

O que é o Eberick V8

O Eberick V8 é um software para projeto estrutural em concreto armado, englobando as etapas de lançamento e análise da estrutura, dimensionamento e detalhamento dos elementos, de acordo com a NBR 6118:2007.

Possui um poderoso sistema gráfico de entrada de dados voltado à forma, facilitando o lançamento, associado à análise da estrutura em um modelo de pórtico espacial, e a diversos recursos de dimensionamento e detalhamento dos elementos, além de visualização tridimensional da estrutura modelada.

Trata-se de um programa diferenciado, com diversos novos recursos que proporcionam alta produtividade na elaboração dos projetos e no estudo de diferentes soluções para um mesmo projeto. O Eberick pode ainda ser complementado por oito módulos: Master, Formas, Escadas, Lajes Treliçadas, Fundações, Muros, Reservatórios e Incêndio.


AltoQi Lumine V4
Software para projetos de instalações elétricas, cabeamento estruturado e SPDA.

AltoQi Hydros V4
Software para projetos de instalações hidrossanitárias, de gás e incêndio.

Version 9 – new features

Instant overview of key results in graphs and charts
Users can configure up to three charts to be assigned to each summary. The most important results are displayed in a dashboard. All in all, information can now be understood far more quickly and easily. The new navigation toolbar enables direct access to all major functions from any part of the program – eliminating the need to return to the main menu.

Data evaluation: new editing and filter options
You can now edit your project data directly from the review runs screen. This allows you to make changes fast, without changing screen, and they will be reflected immediately in all dependent data. On top of this, improved filter and group items enable you to sort runs according to name, order number, week and many other criteria.

Multi-core processor capability: up to eight times faster
Besides faster computing times, Cut Rite now provides a progress bar and an option to “keep the last result”. This allows you to cancel the computing process at any time and to retrieve easily the last result obtained.

Easier and safer: user profiles
Each user can now create his own profile – with password, paths and much more. This makes it much easier to organise different users and to assign specific options to them.

Managing areas and volumes
Ideal for customers with horizontal storage systems: the board library has been extended to work with 50-character codes, instead of the 25 characters previously possible, and includes a new field for “material density” which allows the weight of boards, parts, offcuts and waste to be calculated. This makes it easier to calculate, for example, how many trucks will be needed for a shipment.

Calculated values in the summaries
Cut Rite now also offers you spreadsheet functions. You can, for example, easily determine the number of rip and cross cuts in a cutting pattern, copy data and mathematical formulae as you like and have the results displayed automatically. XLS/XLSX format spreadsheets can be imported directly.

Greater clarity due to vivid design
The new true-colour toolbars and buttons make optimising fun. You can store images in the parts or products libraries and then integrate them, for instance, in quotations.

Everything from the EasySIGN Starter license plus a lot more. EasySIGN Master redefines the term "Complete". Everything you need to design and produce powerful designs. The EasySIGN Master is all about efficiently, never do the same work twice.
Nondestructive design and production steps. Place for example effects on a vector object and bitmap simultaneously and each separate element remains editable.
The template system that works. Edit text and elements though an easy to use wizard to change a template into a completely new design within seconds.
Color trapping for reducing overlapping colors and saving material costs. One easy to use dialog for instant plot ready files.
Merge text and objects, create one design and make any desired number of personalized duplicates in seconds. Accept input from text files, external file formats and databases.
Object manager for drag and drop objects on any level of your design or production drawing or make changes at any level. All effects are recalculated automatically with preservation of quality and detail for output at any size.
Accurate vectorization, with special vector editing tools, to turn a bitmap into a plot able vector object in minutes.
And many more smart features for professional results, fast:
Transparency
Magic Wand tool
Blend
Cloning
Measure colors
Worksheet linking
Text on path
Convert to bitmap
Photo stencil
Welding
Outline and Inline
Plotting
Optical Positioning Systems
Auto number
Html Helper
CSV Helper
Rename Helper
Compatibility
Export and Import from all major file formats
PDF workflow
Blocknesting, Shadow, Striping, Perspective, Round off, Rubber band

Increase your productivity by getting things done with EasySIGN.

 

• Description

• Simple, flexible and economical, Winlog Pro is a SCADA/HMI software package for the supervision of industrial and civil plants. An integrated development environment provides different tools (Gate Builder, Template Builder, Code Builder) for the easy and intuitive creation of multilanguage applications. An extensive library of drivers and an OPC Client interface allow communication with most electronic devices such as PLCs, controllers, motor drives, i/o modules; special functions can be integrated directly by the developer; standard format of history files (DBF, CSV) and ODBC (SQL) support ensure interface with most Windows applications (Excel, Access, etc.). Winlog Pro makes it possible to set up a distributed Client/Server architecture with TCP/IP protocol on Intranet/Internet network or to create web applications accessible from standard browsers; both fix and mobile (GSM) telephone network can be used to communicate with remote devices or to send SMS.
• 
  
• GRAPHIC LIBRARIES
  Development tools include Symbol Factory 2.0, the most popular library of automation graphic objects with over 4,000 manufacturing and industrial objects such as pumps, valves, motors, tanks, PLCs, piping, ISA symbols, etc; an integrated editor allows resizing and changing colour, scheme and orientation of objects (bitmap or metafile). A library of powerful graphic objects is also provided, with circular (Dial, GearDial) and linear (Vslider, Hslider) potentiometers, pointer (120Meter, 180Meter, 270Meter) and linear (Vmeter, Hmeter) indicators, thermometers (ThermoMeter), switches and selectors (RockerSwitch,ToggleSwitch).
• 
  
• RUN-TIME APPLICATIONS
  Any application can be executed using one of the two available low-cost runtime licenses (128 tag and unlimited); multilanguage applications (in two languages or more) can be created, with a simple command to switch between languages. Reports and historical data can be recorded in a standard format (DBF, CSV) that can be easily accessed by other Windows applications (Excel, Access, etc.).
• 
  
• NETWORK ARCHITECTURES
  Distributed Client/Server architectures can be set up using a TCP/IP protocol and a Intranet/Internet network. Multi-master structures, in which each terminal can communicate with the others so as to allow both reading and writing, are also possible. Both the fix and mobile (GSM) telephone network can be used to communicate with remote devices or to send SMS to maintenance operators; in this way a supervision centre can provide a remote assistance service to a network of peripheral sites spread around the country.
• 
  
• TRENDS
  Historical or online trends can be displayed individually or in groups: up to ten trends at a time are possible, which can refer to different kinds of tags, each with its own colour and scale. The temporal axis can be shifted backwards and forwards using video icons, the mouse can be used to zoom in and out, and various other viewing options are possible (grids, line thicknesses, modes of interpolation, etc.).
• 
  
• EVENTS AND ALARMS
  Events and alarms can be activated as a function of the values taken on by associated tags: alarms are signalled immediately in a specially reserved area of the screen, and the confirmation by the operator is also controlled. Status information (active events) and history (date, time, event) can be accessed according to various freely definable categories (eg. priority and location).
• 
  
• RECIPES
  The recipes are sets of characteristic values of a working process or a plant configuration: new recipes can be created and existing ones updated (copied, deleted, renamed, printed and modified), as well as being imported and exported to and from the process itself. The application of a recipe can be commanded by the operator, automatically executed on start-up, or triggered by the program (eg. batch process).
• 
  
• REPORTS
  Reports with summary information about production data or process quality or plant alarms can be generated in a pre-programmed format and can be displayed or printed or sent to any peripheral device. Reports can be either requested by the operator, or automatically generated on a cyclic basis (after a specific time interval, on a particular day of the week, etc.), or triggered by the program (eg. in case of end of production ). Copies of reports are also recorded in history files and can be accessed by other software packages (Excel, Access, etc.).
• 
  
• SECURITY
  Each menu item, template, tag, etc., can be protected by the specification of the groups authorized to access it and those who can modify it. A name, password, and member-ship of one or more groups can then be defined for an unlimited number of operators. Every operator's action that has produced a data modification is recorded in a history file by date, time, event description and operator's name.

• 
  

 

 

 

• Basic capabilities

  • Analysis of static influences in accordance with first order and second order theories
  • Calculating the structural stability (determining the critical forces and buckling lengths)
  • Calculating the natural values (forms and oscillating periods of the structure)
  • Generating the seismic load in accordance with various standards (JUS, EC8, SNIP, ...)
  • Generating automatically the mesh of finite elements
  • Generating automatically the masses in all nodes on the model
  • Analysis of influences throughout defined stages of building construction (prefabricated structures, composite structures, etc.)
  • Modeling the prefabricated floor structures by orthotropic plates
  • Beams and columns with variable cross sections (haunched beams, prismatic columns, laminated wood girders, etc.)
  • Modeling the rigid connections in beam nodes (offset beam - diagrams in clear spans)
  • Eccentric positioning of beams and columns (true modeling of girders in plates, columns with abrupt change of cross section, etc.)
  • Analysis of influences in prestressed structural members (arbitrary cable geometry and calculating the prestressing force loss)
  • Foundations on elastic ground
  • Assigning the completely arbitrary character and direction of load action
  • Analysis of influences due to live load (defining the completely arbitrary pattern and path of live load)
  • Generating automatically the load on rotationally symmetric parts of the model due to various natural phenomena: self-weight, snow, pressure, water, earth, wind
  • Calculating due to temperature influences and support displacement
  • Automatic dimensioning of reinforced concrete (JUS, EUROCODE, SNIP, ACI, DIN, BS, SIA, etc.) structures.
  • Automatic dimensioning of steel structures (JUS, EUROCODE, SIA).
  • Automatic dimensioning of timber structures (JUS, EUROCODE).
  • Creating easily the high quality design documentation with vignette, textual reports and graphic blocks
  

  Graphical Interface

  • Defining the arbitrary planes for drawing
  • Simultaneous use of planar and space drawing
  • Selecting precisely the points in the drawing (dynamic osnap with combined criteria)
  • Dynamic zoom and pan. Dynamic rotation of isometric presentation of the model (orbit)
  • Manipulating the elements in the drawing (copying, mirror copying, deleting, rotating, complete undo/redo system of restoring the drawings, etc.)
  • Generating automatically the vertical elements of the structure
  • Generating automatically the rotationally symmetric bodies (sphere, cone, vault, helix)
  • Operating with blocks of drawings (saving and entering the arbitrarily selected parts of the model)
  • Grouping the arbitrarily selected parts of the model into wholes and deleting the visibility to other parts of the model (only columns, walls, typical floor structures, web members, main girders, etc. visible)
  • Visualization of the model (DirectX render, walking through building with camera)
  

  Processing the Calculation Results

  • Finding quickly the extreme values of influences in the whole model or only in a certain group of elements (extreme values of axial forces in columns only, etc.) maximal bending moments in plates in typical floor, maximal displacements of walls only, etc.)
  • Presentation of results, both in the entire space model and in its certain parts (in selected frame, wall, floor structure, foundations, arbitrarily selected view, etc.)
  • Presentation of results in surface elements by isolines and diagrams along an arbitrarily assigned intersection line
  • Presentation of influences in linear elements by diagrams and color gradientsPresentation of support reactions with direction and intensity
  • Diagrams of stress distribution in composite cross-sections through defined stages of constructing
  • Influences in individual parts of composite cross section
  • Simultaneous presentation of influences in all columns and walls in one level (insight into distribution of influences due to seismic action on all columns and walls in one floor, redistribution of axial forces due to vertical load onto columns and walls of a given level, etc.)
  • Presentation and animation of oscillating forms and deformed model
  • Completely automatized dimensioning of reinforced concrete, steel and wood structures (JUS, EUROCOD, SNIP, DIN, etc.)
  • Adopting reinforcement in reinforced concrete structures with automatic creating of reinforcement details and export to our program "ArmCad 2005".
•  

 

Introdution

• Ramsete III has been thought up and realized as integrated solution for the computerized development of the
• designs for the fabrics printing.
• It is composed of various programs, some dedicated to the management of the peripheral unities (scanner,
• printing, spectrophotometers etc.) others to the treatment of the image according to the demands of the
• various cycles of the production what: creation, correction, films separation, colorway. Thanks to the full
• exploitation of the hardware characteristics and of the more evolved operating systems (IRIX, Linux, MacOSX
• and Windows) the software is able to perform more operations contemporarily reducing accordingly the times
• of elaboration of the design. The application provides besides the support of cross-platform sharing for the
• scanners and printers. An effective memory management and the technique of compression of the image
• complete the system allowing easily to elaborate designs of great dimensions.