Mimaki FineCut 7
12-04-2010, 11:43. Author: vipsoft
Cutting preview
Before starting to cut, start position, the cutting line, cut direction and cutting order, etc can be checked. This function ensures proper cutting. Also if necessary, you can change the conditions.
*When it is clicked,
the picture will be enlarged.
Taking in plot data from other cutting software
In order to reuse the data made by other company's software or plot data in the past, it reads the plot data with CorelDRAW and Illustrator and can plot via FineCut using the original data.
Designation of outputting order by color and by layer
Setting the tool and cutting conditions, the order of cutting can be changed freely within a color or a layer by dragging of the mouse. The cutting is made smoothly coordinated with the features of the tool and the cutting shape to make the beautiful finish.
Multiple cut of the same part with different cut conditions
(only for CF/CF2/CF3 series)
When a hard material or thick material is cut with CF and CF2, it happens that it cannot be cut at one try. By setting the number of cutting times, speed and pressure, etc. for one cut line, FineCut7 is able to cut hard material or thick material by cutting multiple times.
*When it is clicked,
the picture will be enlarged.
Extracting outline of image data
This is a function to extract automatically outline of the image data having no path such as image of BMP, JPEG and TIFF read with CorelDRAW and Illustrator.
Cut line can be created easily from the image data which could not be created up to now.
Line Segment Correction (only for Illustrator version)
By correcting the outline extracted by "Outline extraction", it is possible to refine it to the data with higher accuracy.
With "Line segment correction tool", you can correct easily and sensuously.
·In case of making smooth curve
Direct and simple cutting using data from CorelDRAW and Adobe Illustrator.
With the use of "import" or "export" of cutting conditions, the cutting conditions can be stored for reuse.
Making cutting line to remove residue of media easily
The tiling function makes it possible to perform divisional cutting of lengthy material.
The trapping function makes it possible to set the overlap space easily.
Line width and overlap recognition function for converting object
line width and overlap into a path as they appear on the screen
Output of multi--colored design on a color or layer basis
Preview enabling intuitive operation
Registration of cutting conditions (speed, cutting force and offset)
for each cutting sheet
Sorting function to minimize useless movement of the cutting
plotter
Applicable to cutting plotters with mark sensor, allowing accurate contour cutting of seals, stickers and other patterns
