DataLife Engine - Softnews Media Group

Ottimo-Perfect Cut is a cutting optimization software for single blade and angular beam saws with several features such as: materials archive management, pieces archive management, single-job and multi-job (cutting list with pieces of several materials) optimization, expected machining time and costs computation, machine code generation, production reports, panels labeling, 3D simulation.
Ottimo-Perfect Cut is installed in a PC with Windows® O.S. in the factory or in the office, can be connected with an Ethernet network with the administration software and with the Panel saw software interface.
Ottimo-Perfect Cut allows to obtain an optimized sequence of cutting pattern starting from a cutting list, a material list and a machine configuration. By modify the configuration parameters you can obtain the solution as needed, with minimum waste or minimum machining time. Complete production reports are available. Optimized programs can be exported easily to the panel saw. Moreover the optimizer shows report with estimated times and costs and output customized labels for obtained pieces and off-cuts.
* Materials Database (up to 3.000 different sheets)
* Sheets classification for material type
* Grain and trims information for each type of material
* Automatic used sheets unloading and off-cuts recycle
* Pieces Database (up to 10.000 different pieces)
* Simple job programming to optimize cutting lists with panels of the same material.
* Standard parameters can be customized for each job in order to obtain the best result.
* Several sheets and off-cuts formats can be selected to cut pieces
* Production data, waste and machining time are showed to check immediately for result
* Automatic filling of cutting patterns with by using a filling list.
* Report with optimization general statistics (linear meters, surfaces area, volumes, waste, etc...)
* Materials, panels and strips report
* Graphical lay-outs of cutting patterns with pieces and waste dimensioning
* All reports can be saved as PDF files
* The manual editor allows to insert, delete, move and rotate pieces; to insert, delete and move head-cuts
* Details are showed for each selected panel or waste in the pattern.
* The pieces can be inserted from the job list, from the piece archive or as a new piece
* Statistics of the modified pattern are automatically updated
* The multi-job programming allows to optimize cutting lists (up to 10.000 lines of pieces) with panels of several materials.
* The original cutting list is exploded in several simple list with pieces of the same material
* Summary report of the complete job

JOB IMPORT, COSTS, MACHINE CODE GENERATION
* Job import from a formatted text file or from Excel ® (EasyCut or EasyCut Plus required)
* Export of machine programs saved onto floppy disks, local or Ethernet paths
* Export of a list of program with several type of materials (LLT format)
* Export (splitting) of a single job up to three different panel saws
* Estimated machine time and costs
PIECES LABELING
* Labels can be printed every single piece or by book or by stack of pieces.
* Labels can be printed off-line in the windows printer or on-line in the label printer at the saw by automatic sending label data for the pieces
* Labels can be printed for both pieces and off-cuts of the job
* Graphical Label editor with text, barcode, lines, drawings, to customize the label templates
3D SIMULATOR AND PIECES UNLOADING REPORTS
* Virtual machining 3D simulation of the job
* View of expected machining time
* View of the active cutting pattern with information on the machining cycles
* Configuration of dimensional parameters for the pieces unloading process
* Stacks report for each piece
* Chronological report of stacks composition with graphical lay-out
* Report of used pallets with graphical lay-out

ORDER

Tags: Ottimo Perfect Cut, 630, 733, 770, Smarkey, Eutron, Dongle, Download, CNC, pieces, cutting, machining, report, several, waste, material, offcuts, machine, piece, pattern, panels, materials, panel, obtain, label, software, printed, OttimoPerfect, Export

Flixo- The Thermal Bridge analysis and reporting application for Energy Savings and Sustainable Design
flixo produces thermal-hygro analyses of the component and façade cross-sections, and it also calculates frame U-values according to EN ISO 10077-2. It has been developed by architects, computer scientists and physicists, for architects, planners, energy consultants and building physicists for sustainable design engineering and planning.
For example, flixo can detect thermal bridges in the planning stage that then can be eliminated through design changes. Consequently, building failures can be prevented and heating energy can also be saved.
A further use of flixo is relevant to hygroanalysis, with which, for example, temperature minima on the internal surfaces of a cross-section can be determined in order to avoid the formation of condensed water or mildew.
flixo analyzes two-dimensional component nodes for steady state boundary conditions (room temperatures and thermal transfer coefficients).
flixo is a fully validated thermal bridge software according to EN ISO 10211:2007 and
EN ISO 10077-2:2003.
flixo 5 - the new version is available

New features of version 5

Some highlights of the numerous improvements include:
Streamlines:
Improved visualization of thermal bridges for optimization
Distance Tool:
Determining dimensions and distances of the model
Optimized and configurable user interface:
For customizing the user interface for your needs
Graphic Objects:
Special objects which will be ignored on calculating but will be printed..
Language settings:
The user interface language can be chosen between English, German, Italian and French
DXF-Import:
Defining the import settings directly before importing dxf-files with the ability to define the scale factor of the sketch
Capturing:
It's possible to capture the inputs on drawing or editing using multiple of an angle. The base angle is customizable
Cutting:
Cutting the construction using straight lines or polygons
Help system:
Extended help system with step by step tutorial movies and online examples

Inputs

The physical situation can either be imported via DXF files or be directly entered and processed with the integrated CAD editor.
flixo is subdivided into a design section and a report section. The physical situation (geometry, boundary conditions, materials) is defined in the design part. The results can be interactively combined in the reports. Elements, which arise in all reports, can be defined in a master report.
The integrated and expandable component library of flixo enables components to be simply transferred using the mouse (drag & drop) into the current design.
The CAD editor/layout editor supports the following familiar concepts:
Layers: Objects can be arranged on various layers and the layers can be selectively visible or hidden, printed and frozen.
Snapping possibilities: Objects can be aligned with various auxiliary objects such as auxiliary lines, grids and special points on adjacent objects.
Associative elements such as local results and isotherms.
Mouse and keyboard-controlled input.
Geometrical operations such as grouping, merging, cutting, differences between objects.
A material database with more than 1000 materials from various standards (EN ISO 12524, EN ISO 10077-2, EN ISO 673, EN 6946, DIN 4108-4) is available.
The creation and use of parametric objects let you generate variations of a single construction quickly and simply.
With user or predefined document templates and embedded fields, you can generate reports tailored to your needs. After successful calculation, the report will be automatically generated.

Results

Isotherms and temperature color images of any building detail for qualitative thermal assessment and optimization.
Temperatures at freely determined design points.
Heat flux density at freely determined design points.
Humidities and the distribution of them
Minimum and maximum surface temperatures at freely determined design boundaries and critical room humidities for the assessment of possible mildew formation and condensation problems.
Heat flow at freely determined boundary lines.
Thermal transmission coefficients for quantifying thermal bridging effects: "U-value" (with various boundary conditions to also analyze the critical surface temperature) and the length-related "Psi-value" (also for models with more than two room temperatures)
Automatic calculation of frame U-values according to EN ISO 10077-

Integration into MS-Windows environment

Well-known operation and concepts from the MS Office products:
Copy/Cut and Paste as well as Undo/Redo of the last actions.
Different flixo documents can be edited simultaneously
Exchange of flixo data (design details, results) via the clipboard or using drag & drop. For example, results can be integrated directly in a Word document or copied or moved from one design to another.

ORDER

Tags: design, flixo, thermal, objects, determined, using, freely, various, results, boundary, integrated, example, building, temperature, conditions, which, temperatures, interface, report, Objects