Sort articles by: Date | Most Rates | Most Views | Comments | Alphabet
Article info
  • Views:
  • Author: vipsoft
  • Date: 19-04-2010, 15:40
19-04-2010, 15:40

Man (Mantis) 4.2010 description of the catalogue:

Category: Other Software

Man (Mantis) 4.2010 description of the catalogue:


Man (Mantis) 4.2010 description of the catalogue:

The spare parts catalog MAN (Mantis) at installation demands presence of an empty seat on a hard disk from ~500 Mb up to ~1200 Mb
Contains the full information on lorries, all regions, tractors and buses, and also about engines MAN. Demands the sanction of the monitor 1280x1024.
For search of spare parts for the concrete machine it is necessary to know type (five signs, напр. F2200) and number of the chassis (four signs - 1001) or precisely to know model and updating of the engine established by machine as the program MAN Mantis shows on what models it could be established. In this version the machine is opened on VIN is essentially for such VIN as WMAT46ZZZ1M311016, hammering completely Vin leave on number of the chassis - T46-5728. In the program the information on lorries and buses with 80 for 2008 is submitted. There is a history of replacement of number, search under number, access networks. Accessories and tools. There is a search as a suspension bracket, the engine, etc. The MAN Mantis Prices for spare parts are on separate CD a disk.

Abbreviation MAN - means Machine-building factories of Augsburg and Nuremberg. Firm " MAN " is based in 1915 and is one of conducting manufacturers of vehicles, including buses, and also components for their assembly (bridges, boxes of transfers, engines, cabins).

To remove the program MAN Mantis it is necessary to know the password, very simple "MADONNA".

Identification MAN - Identification under number of the chassis.

Man (Mantis) 4.2010 description of the catalogue:

Article info
  • Views:
  • Author: vipsoft
  • Date: 19-04-2010, 15:49
19-04-2010, 15:49

See Electrical Expert 2005

Category: Other Software

See Electrical Expert 2005



For over 23 years, the IGE+XAO Group has been a software publisher designing, producing, selling and ensuring the maintenance of a range of Computer Aided Design software (called "CAD"). These CAD software products have been designed to help manufacturers in the design and maintenance of the electrical part of production processes. This type of CAD is called "Electrical CAD". IGE+XAO has built a range of Electrical CAD software designed for all the manufacturers, which functions either with an independent computer or with a company network.



See Electrical Expert 2005

Article info
  • Views:
  • Author: vipsoft
  • Date: 19-04-2010, 15:52
19-04-2010, 15:52

Dantec Dynamic Studio

Category: Other Software

Dantec Dynamic Studio


he highlights of DynamicStudio 2.20 are:
Support for a whole range of new cameras – the SpeedSense family – allowing you to work with DynamicStudio using your preferred cameras
Calibration refinement – giving you the highest possible accuracy in stereoscopic PIV
Dynamic Mode Decomposition (DMD) – a brand new add-on which facilitates global stability analysis
Data Visualisation – a powerful data visualisation tool available directly in DynamicStudio
Support of new cameras
A large number of new cameras have been integrated into DynamicStudio on top of the existing cameras. The new SpeedSense family now comprises seven different cameras for time-resolved imaging – each one suited to its special application. For example, the SpeedSense 1010 and 1020 cameras allow direct streaming of images through a Dual Channel CameraLink interface to hard disk. This means a virtually unlimited length of your recordings.


Dantec Dynamic Studio

Article info
  • Views:
  • Author: vipsoft
  • Date: 19-04-2010, 16:05
19-04-2010, 16:05

Symmetrical Trader 4

Category: Other Software

Symmetrical Trader 4


Trading any market carries a high level of risk, and may not be suitable for all investors. The high degree of leverage can work against you as well as for you. Before deciding to invest you should carefully consider your investment objectives, level of experience, and risk appetite. The possibility exists that you could sustain a loss of some or all of your initial investment and therefore you should not invest money that you cannot afford to lose. You should be aware of all the risks associated with trading, and seek advice from an independent financial advisor if you have any doubts.

* The Views and opinions represented in the provided website links and resources are not controlled by the Referring Broker or the FCM. Further, the Referring Broker and the FCM are not responsible for their availability, content, or delivery of services.

Symmetrical Trader 4

Article info
  • Views:
  • Author: vipsoft
  • Date: 19-04-2010, 16:13
19-04-2010, 16:13

PlayBox TitleBox DataBox 2.6.704

Category: Other Software

PlayBox  TitleBox    DataBox  2.6.704


Interactive on-air graphics. Delivers crisp and eye-catching on-air graphics. Multi-layered simultaneous crawls, rolls, animated logos, clocks and text templates are just a mouse click away. TitleBox provides total control during on-air session - changing texts, running speed, transitions is as easy as 1-2-3.

All-in-one content management. The universal metadata description tool. From archives to run-time copy, from types and categories to genres, from credits to links, DataBox maintains total content order through sophisticated set of searching and classification parameters.


PlayBox  TitleBox    DataBox  2.6.704

Article info
  • Views:
  • Author: vipsoft
  • Date: 20-04-2010, 11:59
20-04-2010, 11:59

Bysoft ByBase 6.7.3

Category: Other Software

Bysoft  ByBase   6.7.3



Bysoft – The backbone of your File-to-Part process chain
Bysoft is the program package developed by Bystronic for all cutting and bending processes. Bysoft embodies the highest of efficiency: It is optimally tuned to Bystronic machine systems and more than any other software permits the optimum use of all aspects of the cutting and bending technologies.
Software for sheet processing
Bypart
Constructing individual 2-D parts
Bywork
Creating cutting programs
Bytrace
Vectorization of pictures
Plant Manager Cutting
Unrivalled efficiency for order processing and production
3-axes-CAD/CAM
Software for processing tubes
Bytubepart
Parameterized construction of tube parts
Bytubework
Creation of tube-cutting programs
Software for bending
Bybendpart
Creation of bending process data
Add-on programs
LogiTRACE
Generation of heating, ventilation and air-conditioning components
Remote diagnostics
Tracing of process abnormalities


Bysoft  ByBase   6.7.3

Article info
  • Views:
  • Author: vipsoft
  • Date: 20-04-2010, 12:10
20-04-2010, 12:10

Caneco BT

Category: Other Software

Caneco BT


Caneco BT V.5.2 is a « calculation + schematics » software for low voltage electrical installations.
It is the European leader of its sector and it obtained three technical certificates: NFC 15-100, BS, RGIE.
It defines, cost effectively, the wiring system as well as the distribution devices according to a multi manufacturers database.
It produces every diagrams and useful documents for the conception, implementation, control and maintenance work of the installation.



Caneco BT

Article info
  • Views:
  • Author: vipsoft
  • Date: 20-04-2010, 12:55
20-04-2010, 12:55

EnCase v 6.13

Category: Other Software

EnCase  v 6.13



From the simplest requirements to the most complex, EnCase® Forensic is the premier computer forensic application on the market. It gives investigators the ability to image a drive and preserve it in a forensic manner using the EnCase evidence file format (LEF or E01), a digital evidence container validated and approved by courts worldwide.

EnCase Forensic also contains a full suite of analysis, bookmarking and reporting features. Guidance Software and third party vendors provide support for expanded capabilities to ensure that forensic examiners have the most comprehensive set of utilities.


EnCase  v 6.13

Article info
  • Views:
  • Author: vipsoft
  • Date: 20-04-2010, 13:06
20-04-2010, 13:06

Sofistik v 23

Category: Other Software

Sofistik v 23


SOFiSTiK Structural Desktop (SSD)
For general building design SOFiSTiK offers various FEA-packages mostly based on the SOFiSTiK flagship solver ASE. Any package can be upgraded for special tasks like bridge design, dynamics or tunnel engineering. The SOFiSTiK package will be controlled via the SOFiSTiK Structural Desktop (SSD). The SSD is an all new working enviroment to control the different SOFiSTiK programs without being forced to use the text-based editor. The SSD allows the user a task-oriented way of working by offering various wizards or pre-defined task from a library.
For building design SOFiSTiK offers various packages (all include the SSD):
"SlabDesigner PRO" - 2D non-linear FEA & Design
The SlabDesigner PRO is a powerful 2D FEA package handling the analysis of slabs, walls, frames or grillages. It comes with an AutoCAD-based pre-processor, CAD-based section generator, automatic superpositioning, interactive result viewers and automatic report generation. For those engineers not having AutoCAD, this package comes based on an optional AutoCAD 2006 OEM engine. This means: Full AutoCAD-technology and compatibility for a very competitive price.
SlabDesigner PRO comes with many advanced features like non-linear cracking analysis for slabs and beams, non-linear bedding and supports, integrated t-beam design and theory 2nd order and many international codes like BS, EC, DIN, SIA, ÖNORM, ACI, BBK/BRO (Sweden), SNIP (Russia).
The SlabDesigner PT Pro package offers additionally the option of analysing and designing Pre- and Post-tensioned slab with SOFiPLUS and SSD data input. For more information please check the Post-tensioned Slab Example on our WebSite.
"Basic 3D FEA & Design"
Like the SlabDesigner PRO this package is AutoCAD-based and is an economic start into the 3D FE-analysis using SOFiSTiK. The package come with an interactive pre- and postprocessor and an automatic mesh-generator. The user can perform linear static analysis for any 3D structure, from simple slabs to freeform surfaces including RC-design for plate, beam and truss elements. Implemented codes are identical to the SlabPRO-packages.
"BASIC 3D Frame and Girder Systems"
Based on the program STAR 3 the user has a powerful solution for analysis and design of general frame and girder systems according to 1st/2nd order theory at his fingertips. The input can confortably be done using SOFiPLUS.
"SOFiSTiK Premium" - Advanced 3D FEA & Design
The Premium-package is an ideal upgrade from BASIC 3D FEA. Additional features are:
Volume elements
Pile elements
Non-linear springs
Theory 2nd order
Cracked-section analysis (beams)
Elastic-plastic, plastic-plastic
Torsional buckling checks (EC)
Staged construction
Non-linear bedding
User defined cross-sections incl. design
3D integration of structure's stresses to forces on equivalent cross-sections
Full steel and concrete section design
Thin- and thick-walled section types
...and a lot of more
The SOFiSTiK Premium Package is available in two configurations, the first one as SOFiSTiK Premium Concrete (including the design of shells) and the second one as SOFiSTiK Premium Steel (including theory 3rd order and membrane elements).
The Premium package can easily be upgraded to post-tensioning structures, seismic analysis, bridge and tunnel design.


Column - Column analysis according to 2nd Order Theory
With COLUMN the engineer has a program interface of the new generation at hand. Based on the modules STAR3 and STUE the program offers column analysis and design according to the buckling column model procedure (DIN 1045-1) or 2nd Order Theory including non-linear material behaviour and creepage/shrinkage. Further more COLUMN offers an option for automatically drawing reinforcement plans for SOFiCAD.
More capability characteristics

Sofistik v 23

Tags: SOFiSTiK, design, analysis, package, offers, SlabDesigner, Premium, nonlinear, order, including, elements, Design, various, section, automatic, theory, slabs, according, program, Theory

Article info
  • Views:
  • Author: vipsoft
  • Date: 20-04-2010, 13:09
20-04-2010, 13:09

Alvis – Alarm Visualisation System 3.1

Category: Other Software

Alvis – Alarm Visualisation System 3.1


ALViS - Features
AlViS is a general-purpose tool to develop an user specific monitoring and control system. AlViS is a result of long-term development with hundreds of installations. It is suitable whenever a more transparent and comfortable graphical presentation of the monitored area is required.
Universality

By its conception and price AlViS is suitable for all types and sizes of the monitoring and control applications from the small ones, consisting of several monitoring zones only, to the large applications with numerous attached sensors.
Open system

AlViS has no limitation of sort, quantity, producer neither of way of the monitored devices connection. The number of supported systems, rather large nowadays, is still growing; beside drivers delivered by Spirit Ltd., all the devices equipped with general-purpose interfaces (OPC, Modbus, DDE, Espa, Ascii) could be connected to ALVIS .
Architecture

AlViS is based on scaled architecture enabling client-server communication as well as robust Database & WEB server installation. Following the requirements of the customer the system could be simple desktop installation or distributed LAN client-server installation or Database/WEB server installation. The favourable possibility is the option to combine ALVIS desktop reach feature graphical clients with Internet Explorer WEB clients on one installation . AlViS client is covering "application development functions", "OnLine backend communication processes function" as well as "graphical desktop client function" ensuring the whole visualization part of the system. For functioning one or more drivers are needed, which communicate with attached devices and are servicing the necessary data to AlViS. The driver-programs communicate with clients through the standard TCP/IP LAN protocol or alternatively local by DDE protocol . The number of driver-servers and clients running in the network is not limited and every client can describe optional subset data, provided by the driver-servers.

Alvis – Alarm Visualisation System 3.1

Tags: AlViS, installation, system, clients, graphical, devices, client, monitoring, desktop, protocol, applications, attached, number, large, could, communication, server, clientserver, ALVIS, drivers

Previous Next