Sort articles by: Date | Most Rates | Most Views | Comments | Alphabet
Article info
  • Views:
  • Author: vipsoft
  • Date: 27-10-2010, 16:21
27-10-2010, 16:21

ScanView RipMate 5.1

Category: Sing Rip Print

ScanView  RipMate  5.1


RipMate is a software RIP designed to support ScanView’s DotMate line of
high precision internal drum imagesetters. It runs under Windows NT.
This manual contains the information necessary to install and use RipMate,
including a number of valuable tips about how to get the most out of your
RIP and imagesetter.
A second manual, RipMate 4.0 Workstation User’s Guide, explains how to
install the required software on Macintosh and Windows workstations, and
how to send print jobs to RipMate over a network. Please refer to that manual
when you are setting up and using workstations that will send jobs to
RipMate.
For information on installing and using the optional features in RipMate,
please see the RipMate 4.0 Options Manual.
Since RipMate is used with several different DotMate models, some of the
information in the manual may not be applicable to your machine. Such
information is marked.
Information specific to the imagesetter itself, including installation, calibration,
and the handling of media and cassettes is found in the relevant Dot-
Mate manual for the imagesetter you have purchased.

ScanView  RipMate  5.1

Tags: RipMate, manual, information, imagesetter, workstations, install, including, Windows, using, DotMate, software, different, models, features, applicable, several, Options, machine, Since, please

Article info
  • Views:
  • Author: vipsoft
  • Date: 20-04-2010, 14:51
20-04-2010, 14:51

SportVAS Soccer 3.1

Category: Other Software

SportVAS Soccer 3.1


SportVAS Soccer Video 1.3.x enables you to make compilations based on a flexible label set. In other words, you determine which game moments you want to review and discuss with the players and the coaching staff. You can collect all examples of ball loss, ball possession, switch between offence to defence, corner kicks, free kicks, etc., with a single click of the mouse.

Burn compilation CDs to prepare the players individually or to fine-tune them.

Use the team database.

Link video fragments to tactical drawings: Create synergy between theory and practice.

SportVAS Soccer Video v 1.3.x has been the most successful version of SportVAS so far. It is currently being used by 90% of our clients.


SportVAS Soccer 3.1

Tags: SportVAS, kicks, between, players, Soccer, Video, fragments, drawings, video, tactical, individually, compilation, prepare, Create, finetune, database, synergy, software, clients, please

Article info
  • Views:
  • Author: vipsoft
  • Date: 20-04-2010, 14:48
20-04-2010, 14:48

CONZEPT 16 5.2.0.3

Category: Other Software

CONZEPT 16 5.2.0.3


Performance of the development tools
High-performance database in the GB area
Optimum interaction between the database and interface
Simple initial installation and automatic Kundenupdating
In the program development system CONZEPT 16, these four main requirements are combined on a brilliantly simple way. The Dialog Designer is defined in the RAD method, supported by drag and drop the application. Characterized by the highest performance database is already an integral part of CONZEPT 16 and provides the direct connection between application and database maximum efficiency.

For the real problems often begin after the completion of an application. With CONZEPT 16 is the first installation of the application at the customer, a process that takes only a few minutes setup-based. Using the setup routine will install the necessary files automatically CONZEPT 16 program and the application (for us all contained in the database, and application data file A) is also automatically transferred to the target system. Accordingly, all the steps necessary to operate the customer care and customer training can begin.

Another criterion is the application maintenance in connection with the updating of the customer. The more customers need to be cared for, the greater this problem Preciados is updating the customer is using 16 CONZEPT easy. Per item, the changes are gleaned from the development database and on the client side by page read back - ready. The customer can keep on rolling again. If there are specific processing operations are carried out after the update, this is by connecting directly controllable by the application procedure.

They say it is not - let them convince you directly!

Make an appointment for evaluation workshop with us.


CONZEPT 16 5.2.0.3

Tags: application, customer, database, CONZEPT, development, directly, system, connection, after, necessary, updating, program, begin, automatically, between, installation, software, please, maintenance, email

Article info
  • Views:
  • Author: vipsoft
  • Date: 20-04-2010, 14:31
20-04-2010, 14:31

EasyGLASS 4.5

Category: Other Software

EasyGLASS 4.5


EASYGLASS is the specifica CAD/CAM software solution for the glass and similar materials working industry by numerically controlled machining centers.

EasyGLASS is ideal for:

Mirrors;
Doors;
Tables;
Glazings;
Bevellings;
Notches;
Drops;
Bubbles;
Engravings.


EasyGLASS 4.5

Tags: software, Glazings, Bevellings, Tables, Notches, Doors, Mirrors, Bubbles, email, murturanhotmailcom, please, Engravings, ideal, Drops, centers, glass, similar, solution, CADCAM, specifica

Article info
  • Views:
  • Author: vipsoft
  • Date: 20-04-2010, 13:38
20-04-2010, 13:38

DS-CAM Dental softworks

Category: Other Software

DS-CAM Dental softworks

DS-CAM Dental softworks


DS-CAM, the open 5-axis simultaneous CAM solution with unprecedented ease of use.
DS-CAM is a complete rewrite for optimum performance and functionality to enable dental technicians.


Please have you en V erständnis the Web content to registered users, we provide our full can.
We are a young company. Our goal is to develop a CAM software is used and operated by dental technicians can. The software is designed to support the dental operation at the automation of the production structure and increase the productivity of the laboratory.

The first step is to develop a low-cost CAM program. Then, the integration of various CNC milling machines are on the agenda. These are three-, four-and five axis milling machines.

DS-CAM Dental softworks

Tags: dental, software, milling, DSCAM, develop, machines, technicians, structure, increase, productivity, please, email, automation, production, murturanhotmailcom, laboratory, first, various, three, These