Sort articles by: Date | Most Rates | Most Views | Comments | Alphabet
Article info
  • Views: 5163
  • Author: vipsoft
  • Date: 15-02-2012, 17:33
15-02-2012, 17:33

TEMS Investigation 13.1.1

Category: Telecom Software

TEMS Investigation 13.1.1

TEMS Investigation 13.1.1

TEMS Investigation 13.1.1

TEMS Investigation 13.1.1


The Industry-Leading Air Interface Test Tool

A complete solution for wireless network testing, troubleshooting, and optimization, including LTE drive testing

Mobile operators must troubleshoot and optimize the performance of their wireless networks from rollout through expansion to ensure availability and quality. For this, they need a wireless drive test optimization and troubleshooting tool that can continuously evolve to support today’s and tomorrow’s wireless network technologies while keeping total cost of ownership (TCO) down.

TEMS Investigation is the industry-leading tool for wireless network troubleshooting, verification, optimization, and maintenance of wireless networks. Offering data collection, real-time analysis, and post-processing all in one, TEMS Investigation is a comprehensive solution for all of a network operator’s daily wireless network optimization tasks. This solution eliminates the need for multiple tools, reducing costs and saving time and effort for operations staff.TI Illustration

TEMS Investigation supports all major technologies – GSM/GPRS, EDGE, WCDMA, HSPA/HSPA+, LTE (including TD-LTE), CDMA, EVDO, WiMAX and TD-SCDMA – and major vendor handsets, making it the ideal solution both for rolling out new networks and for ensuring seamless integration with existing networks. Using TEMS Investigation, operators can achieve improved voice quality, increased accessibility, improved retainability, and better service performance. A wide range of powerful, easy-to-use features makes TEMS Investigation essential throughout the network’s life cycle.

Use TEMS Investigation to:

Tune and optimize networks
Perform fault-tracing and wireless network troubleshooting
Verify true terminal behavior with phone based measurements
Verify cell coverage and capacity, as well as accessibility, retainability, and integrity
Perform indoor, pedestrian, and outdoor wireless network measurements

Avaible Versions
TEMS Investigation 10
TEMS Investigation 11
TEMS Investigation 12
TEMS Investigation 13
All builds
Article info
  • Views:
  • Author: vipsoft
  • Date: 15-02-2012, 17:30
15-02-2012, 17:30

Styler 5 by Logica Dakong

Category: ---

Styler 5 by Logica Dakong


Article info
  • Views:
  • Author: vipsoft
  • Date: 15-02-2012, 17:26
15-02-2012, 17:26

SailPack - Sail Design Software

Category: Other Software

SailPack - Sail Design Software

SailPack - Sail Design Software


SailPack Sail Design Software
SailPack - Sail Design Software is a revolutionary new sail production software package offering optimization of the sail design process.
The goal of SailPack software is to simplify and reduce the time required to design and produce sails.

Rigging & Geometry:

Sail Shape:

Measurement:

Panel Layout:

Patches & Reinforcements:

Battens:

Finishing Details & Outline Specifics:

Relax 2 :

Panel Management:

Printout:

Additional Information:
Rigging & Geometry:

Through the use of SailPack the user is able to create a realistic simulation of any number of possible rigging configurations (mast, pole, gaff, etc.). SailPack then builds on the position of deck fittings, including track and blocks, as specific to the yacht.

With SailPack the designer will be able to recreate and duplicate a realistic sail plan, specific to the hardware and rigging of the yacht. The designer can visualize any potential conflict or incompatibility between sail placement and rigging setup, allowing for modification and optimization of final sail geometry. In addition the sail designer can "hoist" and view a complete sail inventory.

Sail Shape:

SailPack gives the designer the ability to create a 3D surface of any possible geometry and sail shape (upwind sails and all downwind sails, including traditional or classic configurations such as a gaff-rigged boat). Data may be entered in either metric or imperial units.

With SailPack we can define the sail surface using any number of cross sections at any position. The sail outline is defined in 3D terms allowing for both lateral and longitudinal edge curvature.

A large number of tools combine to assist the designer in gaining a more realistic view of the work being done at any step of the process. These high quality 3D tools include seaming, mesh, net surface, panels, patches and all accessories.

A 'double-check' function is available to compare mould shape to your panel development.

In addition, the designer also has the power to view his or her sail designs from any angle of view or perspective – and is able to customize the default views in the software.

2D output information is shown in real time reflecting the resulting changes to the outline curve (before and after broadseaming). At 3D view of broadseam distribution is also integrated.

Each designer has the ability to create or customize their own set of shape u>evolution rules and integrate these within the SailPack software, building on their own set of standard mold shapes outlines available.

The SailPack system gives the designer the ability to use a minimal number of initial mold shapes and yet cover a wide range of sail configurations and applications - all within a very secure process. This is possible because SailPack has the ability to take into consideration and integrate both objective (aspect ratio, fabric type, etc.) and subjective (client helming characteristics, sea-state, etc.) parameters. Through these combinations the designer is able to customize, through a simple and automatic process, a unique design specific to the customer.


Measurement:

The designer has the ability to customize and “memorize”, within the SailPack software, any version of racing rules and measurement parameters. At any time during the sail design process the designer has the option of viewing the final measurements and area of the sail surface.

Panel Layout:

SailPack provides the ability to design any panel layout, without limitations, including curved seem paths. Controllable variables include seam angles, number of panels and panel widths. Panel layouts are created using a layout script.

* The concept of layout script within the SailPack software is very important in that only SailPack allows the designer to customize and ‘build on’ the layout process, versus the traditional, but limiting, copy & paste format.


SailPack software provides a variety of tools to identify potential panel layout conflicts and make necessary adjustments during the design process. These tools include the use of panel view, panel broadseam distribution and 3D curvature evaluation. The ability to view and control the quality and accuracy of the panel seaming and to control the meshing method in respect to the original mold is a crucial function which should result in a greatly reduced loft assembly time.

Patches & Reinforcements:

All types of reinforcements (radial, spider, multilayer, etc.) are possible using SailPack including spreader patch and any type of local reinforcements. The reinforcement design procedure is similar to the panel layout process. SailPack uses script to design and illustrate the composition of the patch. With SailPack any type of shape (elliptic, triangular, quadrangular or combination of), is achievable.


Battens:

Battens can be drawn directly into the sail (versus simply marked out at each end). The number, size, orientation and location of battens can be specified. In addition, SailPack gives the designer the ability to modify the outline of the sail and introduce hollow curve between battens.

Finishing Details & Outline Specifics:

Finishing details such as reef points, shape stripes, tell tales, slides placement, windows and sail number location can all be incorporated into the SailPack sail design and clearly defined in the final panel specs.

Relax 2:

In collaboration with Peter Heppel, BSG Développements has incorporated the necessary interface to export the SailPack panel layout and shape to Relax 2, aero-elastic evaluation software

Panel Management:

The output of the final design is a list of sail panels and reinforcement panels which are exported through the use of specialized software, MIB2000 (included in the SailPack software package)

Through MIB2000 the designer is able to modify (flip, rename, rotate, split) each individual panel as necessary. MIB2000 is able to export in all major plotter formats or exchange formats such as HPGL or DXF.

Printout:

Any 2D or 3D view of the sail may be printed or exported using a number of formats (PDF, Word, Excel,...). The designer can choose to print or file the final design as a production sheet, a design sheet and/or a panel layout sheet. With SailPack the designer can also choose to customize the sail data parameters into either/or both Word and Excel formats.,

Article info
  • Views:
  • Author: vipsoft
  • Date: 15-02-2012, 17:20
15-02-2012, 17:20

Ergosoft TexPrint 14 - Ergosoft PosterPrint 14

Category: Sing Rip Print

Ergosoft TexPrint 14 - Ergosoft PosterPrint 14


High end production shops know they can trust ErgoSoft RIP solutions to deliver high quality output with fast turnaround times.

Whether you produce digital textiles, display graphics, digital photography or digital fine art, ErgoSoft offers a solution that targets your needs.

With our 20 years of experience in RIP workflows and Swiss quality engineering, we provide you with finest output results and productivity that keeps you ahead of the competition.

Article info
  • Views:
  • Author: vipsoft
  • Date: 15-02-2012, 17:19
15-02-2012, 17:19

Perkins Pandaros Packager 2.05

Category: Other Software

Perkins Pandaros Packager 2.05

Article info
  • Views:
  • Author: vipsoft
  • Date: 15-02-2012, 17:13
15-02-2012, 17:13

Perfect Cut V6

Category: CAD/CAM CNC

Perfect Cut V6


Perfect Cut optimizer main characteristics are the following:

Minimum scrap.

Easy sectioning.

Optimized cutting lines to obtain reusable tails and sectioning.

Optimized cutting path, with path display, also available "step by step".

Interface towards the most commonly used NC, both by serial port and floppy disk (COPMES, ITALMEC, ELETTROFLEX, IANUA, TRE STELLE, VALMAC, TECNOMETAL, BAVELLONI, BYSTRONIC, BOTTERO, FOREL, INTERMAC, GFPM, CSM).
Perfect Cut screenshot
(click to enlarge the picture)

Any printer that can be configured in WINDOWS environment can be used.

Double-glazing management, with automatic division in sub-groups according to the number of families used, with sticker management.

Possibility of entering cutting orders even with different material families, with automatic decomposition into sub-problems.

Complete and powerful printing.

Label printing that can be personalized according to the customer's needs.

Reusable tails management, divided according to material families.

Grinding management (it can be different for each side).

Tenth of a millimetre or standard and Taiwan inch measurements.

Optimized management of measurement tolerance (set a one millimetre tolerance on pieces size sometimes can reduce tails significantly).

Management of trimming, of the minimum distance between the last piece to cut and the sheet edge and of the minimum distance between the Z cut and the X cut (necessary to break the glass).

Optimized edge management (allows stopping exactly on the edge in case of a well trimmed sheet).

Z strip management to bypass minimum cutting distance limit.

Vein direction management (for glasses with set direction).

Management of the tolerance on the number of cut pieces (useful for standard orders, in order to finish the sheet).

Management of the possible direction limit on the first cut.

Management of the limit on the maximum number of different measures in the same cutting layout.

Management of the limit imposing that all parts of one double-glazing must be cut within the same layout.

Measurements priorities management (which pieces have to be cut first).

Possibility of ordering cutting layouts according to sheet dimensions.

"Scrap recovery" management, optimizing reusable tail dimensions.

Staggered glass management (also in case of different grinding and dimensions of pieces).

Holes and simple squares can be inserted directly on the piece.

Possibility of setting postprocessor at family level (e.g. float can be cut by one machine type and stratified component by another type).

Description, customer, order and processing displayed on the cutting layout.

3 note fields for labels.

Possible batch mode processing (processing sequence launching, printing, etc.).

Possibility of deleting some layouts (e.g. last sheet not completed) moving pieces still to be cut on a new project, giving it a higher priority to complete previous orders.

Highly configurable.

Possible remote activation of software options.

Problem import/export to/towards ascii files, with the possibility to queue problems.

Interface towards channel bending machines: Lisec, Forel, Valmac and Rjukan.

Cost indication for estimates.

Processing time can be set and monitored.

Background optimization and printing (other activities can be carried out at the same time, like entering new data from a new project).

Direct interface towards shapes (proprietor format, DXF, parametric), that can be activated directly from the optimizer or from the management module, with the possibility of using "methods" such as mirroring, grinding offset, edging, edge advance, scale factor, automatic elimination of entities or of parts of them near the edge of the square containing the shape.

Perfect Editor

This software allows opening layouts given by the optimizer and modifying pieces position or cutting lines, in order to optimize reusable tail dimensions. Generally it is used for the final sheet, usually uncompleted, to add new pieces and use it completely. It is very simple to use and very effective. It is possible to start a brand new project, moving one sheet from the project window to the cutting layout window and inserting all desired pieces one by one, even in multiple mode (until place remains). The project window is used like a parking area where pieces are inserted to be positioned in a different way or in a different cutting layout. Another useful tool is the indication of the dimensions of the biggest scrap areas, since it allows to know in advance whether a piece can fit there or not. Some operations can be carried out before (Rotation, Duplication, Deleting) by selecting the function and then selecting one or more pieces. Pieces can be moved from one side to the other or from the layout to the parking area, simply dragging the piece to the location desired. It is possible to move an entire transversal before or after another one or at the beginning/end of a cutting layout. It is possible to delete one or more cutting layouts or changing their multiple value. By double-clicking on a cutting line it is possible to invert it (obviously it has to reach a pre-existing cut or the edge). This module is perfectly integrated with Perfect Cut.

Article info
  • Views:
  • Author: vipsoft
  • Date: 15-02-2012, 17:02
15-02-2012, 17:02

PC-DMIS 2011 MR1

Category: Other Software

PC-DMIS 2011 MR1


PC-DMIS is the world's most popular CMM software for the collection, evaluation, management and presentation of manufacturing data. Our software is standard on Hexagon Metrology measurement devices and is also available on a wide range of non-Hexagon equipment. Use it to fully leverage your manufacturing process and build truly lean systems.
New!

"DataPage+ 2011 MR1" webinar is now available for online streaming. Along with a special "Bonus Tutorial" selected by the webinar attendees.
New Release! DataPage+ 2011 MR1 Learn more about how DataPage+ is the Premier SPC Tool Set for Metrology.
PC-DMIS Blade 4.0 Learn more about how PC-DMIS Blade simplifies airfoil inspection.
PC-DMIS Reshaper 6.3 trial version PC-DMIS Reshaper has been updated to a more intuitive interface and enhanced features for point cloud analysis and reverse engineering.
EMS Brochure See what's new within the PC-DMIS family of software solutions by downloading our latest brochure
Article info
  • Views: 2771
  • Author: vipsoft
  • Date: 15-02-2012, 16:59
15-02-2012, 16:59

Nemo Outdoor 6.1.0.8

Category: Telecom Software

Nemo Outdoor 6.1.0.8



Nemo Outdoor is a laptop-based drive test tool which supports over 220 terminals and scanning receivers from various vendors and all major network technologies.

Nemo Outdoor

A single software platform plus modularity means easy tailorability, enabling you to tailor the product precisely to your needs. Nemo Outdoor’s powerful software platform works for all technologies and for different protocol and application testing options, giving a consistent look and feel. It’s also the only portable measurement solution that offers multiple simultaneous data connection measurements, and runs on a single laptop. Nemo Outdoor produces measurement files in the open ASCII Nemo File Format, enabling quick and easy troubleshooting and analysis, using Nemo Analyze or third-party post-processing tools.

Article info
  • Views: 2725
  • Author: vipsoft
  • Date: 15-02-2012, 16:57
15-02-2012, 16:57

Nemo Outdoor 5.70

Category: Telecom Software

Nemo Outdoor 5.70


Nemo Outdoor is a laptop-based drive test tool which supports over 220 terminals and scanning receivers from various vendors and all major network technologies.

Nemo Outdoor

A single software platform plus modularity means easy tailorability, enabling you to tailor the product precisely to your needs. Nemo Outdoor’s powerful software platform works for all technologies and for different protocol and application testing options, giving a consistent look and feel. It’s also the only portable measurement solution that offers multiple simultaneous data connection measurements, and runs on a single laptop. Nemo Outdoor produces measurement files in the open ASCII Nemo File Format, enabling quick and easy troubleshooting and analysis, using Nemo Analyze or third-party post-processing tools.

Article info
  • Views: 2570
  • Author: vipsoft
  • Date: 15-02-2012, 16:53
15-02-2012, 16:53

Nemo Analyze 6.0.0

Category: Telecom Software

Nemo Analyze 6.0.0


Nemo Analyze
Scalability from desktop to enterprise level

Nemo Analyze is a highly efficient and fully scalable analysis tool for benchmarking, automated troubleshooting, and statistical reporting based on drive test data. For benchmarking, its predetermined report templates help compare KPIs from different operators, technologies, and time frames, and visualise the results in a single report; and it supports all the major network technologies, including LTE, HSPA+, and CDMA2000.

Nemo Analyze

Integrating Nemo Analyze with other Nemo tools provides a complete automated data processing chain from raw measurement data to automatically generated results in workbook format.

<
Previous Next